Saturday, January 7, 2012

VLAN settings on SCVMM 2012 RC

If you use VLAN in your network, you can simply add a VLAN id directly into the "Virtual Network" adapter using SCVMM 2008. The new 2012 RC introduces "Logical Networks" concept where you have to pre-define the VLAN id and network subnets before they can be rolled out. On the SCVMM 2012 RC management console, click on Fabric and Logical Networks as shown below:

On individual virtual networks, you have to define new network site and add the corresponding VLAN ids and IP address subnets as shown below:


When you return to the "Network Adapter" settings of your VMs, you can now assign the VLAN id accordingly.

2 comments: